[Instructions] Motorize LEGO Technic 42210 Nissan Skyline GT-R( R34) with BuWizz 3.0 and BuWizz motor

***Important Notice***
Due to the serious issue of unauthorized selling of my instructions, I have to increase the watermark coverage area. In order to protect my work, I hope everyone can understand and support this decision. The watermark has a very low transparency and will not affect the building. 

This RC mod transforms your LEGO Technic 42210 Nissan Skyline GT-R (R34) into a remote-controlled version—using only the original set parts, motors, and battery. It’s a great project for players looking for speed and drifting action.

⚠️ Note: Frequent drifting will damage the part 6615 Technic Axle 4L with 2 CV Joints. 

• If you're using BuWizz 3.0, it's recommended to reduce the motor port output voltage to 1.68V via the BuWizz app (approximately a 20% reduction). 
• If you're using BuWizz 2.0, please select Normal speed mode to avoid power cut-off, as higher modes will cause the battery to shut down.
• BuWizz motors are only supported by BuWizz 3.0 or 2.0. Using them with Mould King or other non-BuWizz batteries will result in permanent battery damage.

A fun and simple weekend project to bring your Technic build to life with remote control!

BuWizz 3.0 solution
- BuWizz 3.0 x1
- Driving: BuWizz motor x2
- Steering: Powered Up L motor x1

BuWizz 2.0 solution
- BuWizz 2.0 x1  
- Driving:   BuWizz motor x2
- Steering:  Power functions Servo motor x1 

Moudlking solution

• Mould King M0006 4.0 Powered Module Kit x1 
  
• Moud King Buggy motor x2
• Servo motor x1

When connecting BuWizz motors to channels A and B, you need to press the top button each time to merge the channels.
For the PF Servo Motor connected to channel D, press the left or right D button once to change the steering direction. The steering direction will remain until changed again manually.